Subject: Fwd: Building your own E-shaft ignition trigger.
From: "Perry Mick" <>
Date: 2/1/1999, 1:43 PM
To: perrym@teleport.com




Date: Sat, 30 Jan 1999 17:54:40 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Building your own E-shaft ignition trigger.

Tracy Crook wrote:


snip....

  100 ma sounds high for the LED
current.  Did you mean 10 MA?

Tracy Crook   rws@altavista.net

Opps! I see why you thought this! R1 at 100 ohms is for a  
50 ma LED you need 50 ohms for the 100 ma LED. As I recall
we could get only 56 ohms.

During the last ten years of production we used the more expensive
high efficiency 50 ma LED and my mind (what is left of it) was on
auto pilot :-).
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com