Jeff Spitzer wrote:
At 09:26 PM 1/30/99 -0800, you wrote:
I made the interrupter ring out of carbon fiber.
Danger! What do you recommend for bolt torque? Are you gonna crush the
carbon?
Jeff Spitzer
Good point Jeff. Thanks for bringing it up. Use a stud with
two nuts. The first torqued to hold the clutch disk and the second
to hold the interrupter ring. I will make a change in the drawing.
That is probably cheaper than putting metal bushings in the
carbon fiber.
Thanks Jeff.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org