Subject: Fwd: Building your own E-shaft ignition trigger.
From: "Perry Mick" <>
Date: 2/2/1999, 5:38 PM
To: perrym@teleport.com




Date: Sun, 31 Jan 1999 02:14:01 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Building your own E-shaft ignition trigger.

Charlie and Tupper England wrote:

snip
Nope! 24 mw at 1.2 volts or so as I recall.  Those are 100 ma LED's.
High power infrared LED's.

Some are only 50 ma and put out the same amount of light but they 
are
not listed in Digi Key. More money too.

snip

.024/1.2=.020=20mA
P/V=I right?

Charlie

Right Charlie! I was probably off on the voltage drop across the LED.

Lets see V = P/I     .024/.1 = .24 volts. Yep. 

Thanks for correcting me on this. It's great having you guys around
checking my every move.

It's been awhile since I messed with this circuit. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com