Subject: 900 HP 3 rotor ducted fan engine on dyno.
From: Paul
Date: 2/3/1999, 3:42 PM
To: z

The custom throttle body is on the extreme left. Next comes
the plenum. The aluminum pipe above the intake tubes 
with blue AN fittings is one of two high pressure fuel
manifolds. The injectors point down the pipes at about
a thirty degree angle. The other set is just below the intake 
tubes. The intake tubes are about two and a quarter inch in
diameter. Below is the Inconel exhaust manifold and turbo.

Lower right is the turbo pop off valve.

The return oil flow from the turbo is scavenged by one of the
dry sump pumps seen off to the right just above the pop off
valve.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

dyno3rot.jpg