Date: Mon, 01 Feb 1999 09:50:56 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Cost of a 240 HP peripheral port engine.

Castle, Ron wrote:

Paul,
  Message for Paul Yaw.
  I have a six port 91 brand new, I would like to know what $$ would 

be to

peripheral port this engine...
I need at least 240HP. This engine is going into a ERACER
double wide eze....

  Ron Castle

It will be easier if you run a 3:1 PSRU Ron. That way you can
run the engine up to 9000 RPM. Racing Beat has a 300 HP
normally aspirated peripheral port 13B in their catalog.
Why settle for only 240 HP?

Picture below. perip13b.jpg

Take off the silly mechanical fuel injection and distributor 
and replace  them with electronics. The alternator is already in
the right place :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org



______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com