Date: Sat, 30 Jan 1999 09:49:10 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Neils neat oil /water heat exchangers
Neil A. Kruiswyk wrote:
To all,
Here is a rough drawing of the design we're flying with. The
inlets and
outlets can be placed just about anywhere that suits your
installation. It
has 430 sq. in of cooling surface area between oil and water but
again, this
can be changed to suit by using a larger or smaller exchanger.
So far, oil temp out is about 5 degrees different to water temp in
and
it seems holds that difference regardless of water temp. i.e., 180
degree
water enters the exchanger, the oil will be 185 degrees. for 145
water, the
oil is 150.
This unit was made from 2 oil to water transmission coolers as
found in
modern GM cars and truck, salvaged from leaking/broken rads. The
outside
case is standard AL square tubing with end plates welded on after
installing
the exchangers.
The next unit I build will be made from a standard oil-air cooler
immersed in the same type of AL square tube having a total surface
area of
~500 sq. in.
Neil
PS, Paul, you may want to covert this to GIF or JPEG
Also, Keep that P-51 radiator information flowing!! I'm in the
process of
changing my rad right now.
Whats the wall thickness on that tubing Neil? Looks great and
very compact. It is great news that it is working so well.
The only drawback I can see over the pan type oil water heat
exchanger is you have to plumb the high pressure oil in and out
of this unit. Two or more joints to possibly leak and lead
to catastrophic engine failure.
(I hate to be the bearer of less than great news.)
Is there some way of reversing the process and putting a
water rad in the pan? No oil plumbing at all!
BTW how did you get that DXF file to transmitt as a binary file
when it is obviously a plain ASCII text file? Every time I try it
it shows up as a attached readable text file. Did you have to
specify what type of file it was when you attached it?
neilhtx.gif
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com