Phil Williamson wrote:
Would someone please post a the difference between a peripheral port vs side
port?
Is it something you can add, modify or change? Is it a 13B thing?
Phil
The intake ports are in the end and in the middle housings with the
stock side
port engine. The intake ports are in the two rotor housings with
the peripheral port engines. See the News Letter web site below under
INTAKE SYSTEMS for a picture of peripheral intake ports in rotor
housings.
It is something you can add. You cut a hole in a rotor housing and epoxy
in a metal sleave to act as an peripheral intake port. Since all street
engines
come with side ports these side ports need to be plugged up with epoxy.
This has been done for years in automotive racing.
Peripheral ports are not unique to a two rotor 13B. See the web site
below
under RACING BEAT 900 HP DUCTED FAN ENGINES for pictures of a three
rotor
motor with home made peripheral intake ports added.
BTW the rotor housing for the three rotor and the two rotor are the same
part.
Did this clear it up for you Phil?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org