Subject: Fwd: Strange low frequency vibration.
From: "Perry Mick" <>
Date: 2/6/1999, 4:46 PM
To: perrym@teleport.com




Date: Mon, 01 Feb 1999 18:23:03 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Strange low frequency vibration.

Neil A. Kruiswyk wrote:

Ed,

    I whole heartedly agree on composites deadening sound but this is
different (or so I think) and very pronounced.  I have resonance in my 
plane
at around 3500 rpm which doesn't bother me in the least.  (I'm never 
at that
RPM or any multiple of 3500.)  My resonance is constant at a 
particular RPM
which causes the fuselage and panel to "BUZZ"  whereas Jims strange
vibration is noticeable from 3000 RPM up to max RPM (and probably 
beyond).
It is best described as a sound very much like a twin with it's props 
out of
sync.

    All we can say for sure is changing to my IVO 3 blade prop made 
the
noise go away.  Whether it's because of three blades or perhaps a 
difference
in weight, who knows.  We checked his 2 blade wood prop for balance 
and
pitch (between the blades) and it is virtually perfect in all regards.

    Paul, Recording the sound is a good thought and we may try and do 
just
that.

    The mystery continues....

Neil

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org


______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com