Bulent Aliev wrote:
You may be right Paul. I have the fuselage in my room but the thrust line is
some kind of a secret with Nat Puffer, so we buy motor mounts pre made from
his suppliers. There is no reference in the plans. He tells us: Buy the mount
from my guy and the engine will be in the right place.
The top of the longerons is WL 23. Looks like the prop hub is just above. The
thrust line is 1.5 degree higher at the prop.
Bulent
Paul wrote:
You can figure it out if you have the cowling. Set up the fuselage
and use a level to set the firewall verticle. Then use a string
and a construction type string level to locate the center of the
prop shaft hole in the cowling.
If the hole is an oval, or some other weird shape, than goto plan B.
Plan B assume it is midway between all dynofocal
mounts on the stock motor mount. Most Lycoming engines are.
I have the drawing for the stock mount so I can do that.
The BD-4 plans also have such a drawing and the thrust line is
shown there. It is a function of the engine and all Lycoming
engines of the same type are the same.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org