Bulent Aliev wrote:
Hi Paul,
I was considering the 13B Turbo II for my Cozy MK IV as a substitute for
the Lyc. O 360, But looks like the PP 13B could do the same job with
less weight and simplicity? The turbo opens a whole new can of worms and
expenses.
So I have couple questions:
Which core model is more suitable for PP - turbo or NA?
Ready made PP rotor housings from R. Beat are about $900 ea. I have
access to very well equipped machine shop but will need very good
instructions to do the porting for a first time. does any one have such
instructions?
Regards
Bulent
If you are going to go peripheral port any late model engine is good.
Actually any engine is good as you will not be using the side ports.
The roll pins in the rotor gear are not a real issue as I don't think
too many people will be running the engine faster than about 6500 RPM.
I was thinking about that today on the way up to the hangar.
I will do some drawings. Not as radical as Racing Beat's PP. More like
what Everett did. I will save that tension bolt that RB does away with.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org