Subject: Ignition coils with and without igniters.
From: Paul
Date: 2/9/1999, 8:31 PM
To: z

Ramon Collado. wrote:

Hi, Paul........could you tell me the difference between a  coil with
igniter and a regular coil??    Thanks.

Ramon


Its mainly a question of trigger current draw.  The built in igniter
is a transister that amplifies the trigger signal. The trigger 
signal is usually about 5 volts at an extremely low current. 
Perhaps as low as 1/1000 of an amp.

A conventional coil on the other hand can draw several amps 
through its primary side when the points are closed. When
the points open the sudden reduction in current in the primary
winding induces a high voltage in the secondary winding.

The conventional coil looks somewhat like a beer can. The igniter
coil is usually an odd shape.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org