Paul Yaw wrote:
Paul wrote:
Craig Pugsley wrote:
Hi there,
Yesterday I received an email from a guy in Puerto Rico who claims to know
someone with a 1027hp 20B drag car. (7.71 1/4 mile MX3).
Any guesses as to what the upper limit of these engines is? Presumably at
over 3 times the stock output the coupling for the front rotor could be a
little over stressed..
Cheers,
Craig.
That is not quite as much HP per rotor as Able Ibbara is getting
here in So Cal.
He is getting about 730 HP out of a two rotor or 365 HP per rotor
That would give 1095 for a three rotor.
Is'nt it amazing :-) Where will it all end?
I suspect it will all end when one of these guys tries to make their
motor last more than eight seconds at full throttle.
Paul Yaw
What is also amazing so far is Able has a several dozen runs
on his engine. Most fuel and blown dragsters make only one or two runs
before overhaul. Might last quite awhile if you could pump enough cold
water and oil through it. Be fun to try. Jim Mederer of R Beat is
going to find out shortly with those 900 HP three rotors.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org