Subject: Making a composite prop Good web site link
From: Paul
Date: 2/10/1999, 8:29 AM
To: z

Ernesto Sanchez wrote:

Hello Paul,  When making a carbon fiber propeller, do you know the type
of
fiber/resin to use and how many layer would  it require for this job???

Check this site out:   http://members.aol.com/Lee810/propfab.html

Yes that is a good way of doing it. Unfortunately you need access to a 
3D mill or you have to carve the wood by hand. John Lynch has 3D
computer driven carving machine and he carves wooden prop blanks
for Klause Savier. Do you have access to a 3D mill? 

It is much easier to carve foam by hand with thin metal templates 
embedded into the foam every two inches. That is the technique I 
am suggesting on the newsletter web site. It should take one fifth
the time of carving it out of wood by hand and be more accurate in 
the process. 

Coating it with carbon fiber is more or less the same process. 

Thanks for sending me that site. It would be a good addition
to the links on the news letter web site.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org