Subject: P51 cooling duct and flight controls.
From: Paul
Date: 2/10/1999, 1:18 AM
To: z

Most airplanes have a long push pull rod for elevator control.
Unfortunately this is right where you want to put a P51 style
cooling duct. Consider moving this control over to one side
or the other of the aft fuselage to make room for an efficient
P51 style cooling duct. This probaly could be done with
a short torque tube just ahead of the duct or just behind
the seats. Use a 1 1/2 inch diameter or larger thin wall 
4130 torque tube and large diameter light weight "helicoptor"
type  ball bearings to maintain good control rigidity
and feel. Here is an excerpt from the Fafnir catalog.

 contbear.jpg

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

contbear.jpg