Bob Darrah wrote:
Paul,
Have been following your news group for a short time now and it appears
there are a lot of knowledgeable
individuals out there, but I am not one of them (yet).
How does one go about acquiring a 20B engine? So far my choices are to
pay over four grand, sight unseen,
and have it shipped to Austin, TX. I am not in the habit of parting
with that large a sum of money that way.
How does one know if he is getting a usable engine? I want to put it
in a Seawind.
What engine control/monitoring system is required, and what is desirable?
And a thousand other minor details.
Thanks for all the info so far.
Bob Darrah
Thats a major problem with the three rotor. They are getting rare.
When you buy a used engine you never know what kind of condition
it is in unless it is running someplace. I would plan on
overhauling it. That could cost you up to $2000 in parts
if it needed all three new rotor housing. They are about
three hundread fifty each. An unlikely scenario but
possible.
Some of the guys on here have spare three rotors lying around.
For four grand the seller ought to garantee the compression
readings at least. Make him take a credit card with the
understanding if the compression does not come up to spec
he will pay shipping both ways. Deny the credit card charge
in that event.
If you want to be on the safe side Contact Racing Beat and
Jim Mederer will build you one up from new parts.
I would guess for around $10,000 more or less.
He has a pipeline into Japan for parts.
Another possibility is buy just the unique three rotor
parts new. Shaft, one center housing and balance weights.
Most other parts are the same as the 13B two rotor.
Get a quote from R Beat.
The Sea Wind needs a lot of power and less weight so I would
not put a NA or turbo two rotor in it. Have you looked into
a Czech LOM PT6 copy?
BTW how is that Buick V6 powered Sea Wind doing?
PL
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org