Subject: Chemically machining cast iron end housings
From: Paul
Date: 2/11/1999, 7:14 PM
To: z

Cz2002@aol.com wrote:

I don't think I would try to pump acid through the cooling system because the
seal in the pump will not hold acid very long. I know because I've tried it.
Jim Lentine


I did not mean with the stock pump JIM. The chemical milling people
use plastic pumps. 

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org