Pebvjs@aol.com wrote:
A peristaltic pump would be the way to go. They are used in the chemical and
food industry. They are basically a plastic or rubber tube placed against a
semicircular housing. The pump shaft has spokes with rollers on the ends. The
rollers squeeze the tubing to the housing trapping fluid in the tubing between
rollers. As the shaft turns the trapped fluid is pushed along the tube to the
other end of the pump. Nothing touches the fluid but the inside of the tube.
Ed pebvjs@aol.com
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org