Subject: Chemically machining cast iron end housings
From: Paul
Date: 2/12/1999, 3:17 AM
To: z

Paul Yaw wrote:

Paul wrote:

Archie Frangoudis wrote:

We tried extrudehone about fifteen years ago, and while it
produces a nice finish, it will not necessarily remove material
where desired, it continuously removes the high spots in it's way.
It is an old method of die manufacture finish that has found it's
way into engine work.
archie

Extrude Hone, at least applied to airflow passages, is worthless.
Unfortunately it is well marketed by people who either don't know any
better, or have no integrity.  As for modifying the water jackets, it
might work ok.

Paul Yaw


 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org