Ray Richardson wrote:
PAUL
THANK YOU FOR TAKING THE TIME TO TALK WITH ME LAST NIGHT
OUR WEB PAGE IS http://www.POWERSPORTAVIATION.COM
YOU WILL BE RECEIVING INFORMATION VERY SOON VIA US MAIL
THANKS
DOUG RICHARDSON
"Ray Richardson Jr." <ratech@earthlink.net>
Had a long talk on the phone last night with Doug. He is a principle
in Power Sport Aviation the company that bought Everett's project.
Power Sport Aviation is co-located and co-owned with a very capable NC
machine shop. Some of the NC machine tools they own are so big the
building had to be built around them.
They are building a dyno and development is going forward on
an improved version of Everett's PSRU design. The company is
located on an airfield for convient flight testing.
The initial product will have mechanical fuel injection and
ignition advance. The engine is a peripheral port arrangement
developing 200 HP at 5900 RPM with Everret's butterfly throttle
system for improving the PP idle. See the picture below.
powsport.jpg.
This engine has gone 240 MPH or so in
Allan Tolle's RV3 at Sun & Fun. Needless to say this is
the fastest rotary engine powered airplane so far.
This is my idea and not Power Sport's.
If you have a completed and flying airplane (not necessarily
with a rotary engine) and would like to do some inflight
testing in conjunction with Power Sport contact them at
"Ray Richardson Jr." <ratech@earthlink.net> for details.
I hope to see some complete firewall forward turnkey engine
systems from them in the near future.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org