Peter Cowan/Lexi Cameron wrote:
I've been following your notes on this subject with interest (and some
difficulty since I don't have an engineering background).
A friend has recently purchased but not flown a V6 STOL. The previous owner
claims 700 successful hours with a cooling arrangement far simpler than what
I've been hearing about from you folks: the rad is mounted horizontally
ahead of the stab; an auto type shroud and electric cooling fan are mounted
on top of the rad; there are no scoops simply an open grill work on the top
and bottom of the fuse. This won't work will it?>
Well at least he is adhering to Rule One. "Keep the outlet
above the inlet."
With 700 hours it must be cooling. A couple of questions. How much
HP in the cooling fan motor? How much does the fan motor weigh? (with
the
Ford he may need the weight in the back). How big
is the rad? How fast does he cruise? How many gallons an hour
is he burning? (this will tell me the average HP he is using.)
If he is only using about 80-90 HP (and I suspect that is the case)
the cooling requirements for the Ford will be much lower.
The Ford V6 STOL is basicly a large ultra light based on it's wing
loading and it is not very fast.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org