Jeff Spitzer wrote:
At 08:18 PM 2/19/99 -0800, you wrote:
Chuck_Harbert@arkwright.com wrote:
I believe the inlet diffuser will effectively distribute the air to the HX,
but there is no outlet duct (because there is no room for it). The exit air
just dumps into the upper cowl. Since it is a pusher, I'm hoping that the
prop will pull the warm air from the cowl (HX, engine, turbo) and assist
the HX efficiency. Most of the planes I've seen using auto conversions
don't have designed exhaust ducts.
I'd be interested in other peoples experiences as to how they view what
I've done and how they've solved their similar cooling problems. Jeff, how
much efficiency will I lose w/o an exhaust duct? If necessary, I have the
ability to add an additional HX w/duct to the lower cowl, but obviously,
I'm hoping not to.
Not alot. The air is already going rather slow when it leaves the cooler.
As long as there is plenty of open area in your cowl for the air to flow
through it won't lose too much. If you can identify your smallest cross
section (a cross section of the cowls less all the crap in the way) then
you will be able to get an idea of how much you will be losing. You will
probably lose several times the velocity head associated with your smallest
cross section. If that head is only .05 inches of water...no big deal.
The main thing for you is to make sure that you have a good radius on your
cowl flap or whatever exit you have. That makes a much bigger difference
than the travel through the cowl.
Jeff Spitzer
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org