Paul Yaw wrote:
George Moore wrote:
Regarding your question about the twisted wire in the tubes of the
factory oil cooler, In the HVAC business, all of the commercial and
industrial heat exchanger products are fitted with devices either
inserted into the tubes or built as a part of the tubes to discourage
laminer flow ! The object is to force the liquid giving up or absorbing
the heat in the tube to travel as long as possible to get more effective
heat transfer. But this has to be balanced against increasing the
pressure drop thru the tubes !
A given amount of liquid forced to travel down a tube spirally is
going to encounter more tube surface area than a straightline or laminer
flow path, and therefore have more effective heat transfer.
So if I understand you correctly, the explanation that I have heard is
correct? If that is the case, we alredy know that the stock oil cooler
is sufficient in terms of flow, and cooling capability. Is there any
disadvantage to using the stock oil cooler in an aircraft application?
Paul Yaw
Finding a place to put yet another air duct. One good duct
is probably better than two fair ducts. You also have at least
two more high pressure connections.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org