Subject: Hoerner's address and jpg of ring rads.
From: Paul
Date: 2/24/1999, 8:07 AM
To: z

Bill Freeman wrote:

Paul,

Just an idea.  The Germans built a number of water cooled A/C
with what appears to be air cooled radials, based on the cowling
shape.  What they did was used the extrenal diffusion of a
round motor type of cowling and put the circular radiator
in the front of the engine.  Usually dumped the exit air
out of cowl flaps around the circumference of the cowl,
ahead of the engine.  The Ta-152 is one example, there are
many others.

Of course - practicality raises its ugly head.  Where do we find a
circular radiator with a hole in the middle at a low cost?
It promises to be very low drag and mechanically simple,
other than the radiator itself.  A lot easier to build than
a large P51 type duct that requires massive changes to
the rear fuselage and may cause a CG problem to boot.

Take care.

Bill

I guess you missed this jpg Bill. I uploaded it last week.
fluidyn2.jpg

It is from Hoerner's fluid Dynamic Drag.
Lots of that kind of stuff in there.

Send a letter to this address

Dr.-Ing. S. F. Hoerner
148 Busted Drive
Midland Park 
New Jersey,
07432.

Sig died a few years ago but I think his wife is still selling the
book.

It's a classic. Also check Amazon.com in the remote poss. they have it.

It was published in 1965 and I have found it indispensible since
1968 when I bought my signed copy.

PL

 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

fluidyn2.jpg