Tracy Crook wrote:

Anderson Ed wrote:

Tracy,
 Just reread your timing instructions.  In them you recommend 30 BTDC
for initial static timing.  Then you recommend setting leading plug
timing to 20 BTDC at 5000 rpm. So I now have 10 Degrees more advance
than you recommend at 5000 rpm.  Just getting senile I guess.  So will
reset the timing this weekend.

Ed Anderson

I started the 20 degree recommendation when I went to same timing on the
trailing plug as a conservative setting.  I now think 23 degrees is OK.
Tracy Crook   rws@altavista.net

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org