Subject: Boundry layer trippers for NACA ducts.
From: Paul
Date: 2/25/1999, 8:37 AM
To: z

Anderson Ed wrote:

I think I will try adding a ridge around the opening   - any idea about
height 3/8" ?? as that would be easy to do and check the results.
Thanks for the suggestion.

Ed

I think the idea is to get it above the boundry layer. So it all
depends.
Try .035 thick aluminum with slots in it and hold that to the inner
walls
with machine screws so you can adjust the height. Worked for us with
race car spoilers :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org