Subject: Splitter location for oil cooler
From: Paul
Date: 2/25/1999, 8:52 AM
To: z

Anderson Ed wrote:

For what its worth the attached file shows a sketch of my current oil
cooler installation

Ed


Looks like that splitter might be hurting rather than helping. 

The NACA duct in that position is not working the way it should. I would
do away with it and use a convential boundray layer bypass snorkel
scoop.
with a vertical opening. Carve the external shape from blue foam cover
it with glass epoxy and then drill a three inch diameter hole in
the business end and taper the hole to a five inch diameter for the
hose.

A better way would be to do it the way Tracy is doing it
to get a more stright shot into the cooler.

Also if you have room shorten the five inch hose and lengthen
the duct. Use the duct coordinates I just up loaded.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Ed-A-Oil-Cooler-Duct.jpg