I have noticed this pump in the Edmund Scientific Catalog
for years.
http://www.edsci.com
The web site is not too neat so order a printed catalog.
At 6000 RPM the ignition system is putting out
12,000 pulses per minute or 200 pulses per second
for a two rotor. 100 pulses per second for each
rotor.
Use two pumps and trigger them from the leading
or trailing spark plug trigger and a power transistor
bridge circuit. The pump weighs less than 0.1 pound.
It is basicly a solonoid with a ball check valve.
Restrict the inlet flow with a needle valve
or small hose diameter.
Viola! Timed oil injection because as one
chamber is firing another is in the intake cycle.
I will draw a skematic if anybody is interested
in experimenting with these pumps.
Get the electronic parts from DigiKey.
http://www.digikey.com
This is light duty for these pumps so they
should last almost forever. Never the less
mount them in the cockpit someplace so you can monitor
them and change them out if they ever fail.
Now the oil flow will be proportional to RPM and
with a prop load...also be proportional to power.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org