Paul Yaw wrote:
In trying like hell to bend the rules in certain classes of racing, I
have removed the booster venturi from the carburetor to improve
airflow. I replace it with a tube, perpendicular to the airstream,
extending halfway into the venturi bore. This simple seteup delivers a
surprisingly strong, and linear signal. By flowing the carburetor in 10
cfm increments, from 20, to 500, I measured the pressure drop at the
tube throughout the flow range. The signal "curve" rose as a square
function. In other words, when airflow doubled, the pressure drop
quadrupled. (I know that is what SHOULD happen, but you would be
surprised how hard it is to get a smooth booster curve in a
carburetor!) So, to double the fluid flow, you need four times the
pressure drop. Viola! This setup would restrict airflow VERY little,
and would meter oil in relationship to airflow. I am sure it would
require some tweeking, but it could be made to work quite well. I
intend to try this, but I will probably use an auxiliary pump, and a
float, and needle and seat valve in the tank. This will insure that the
metering does not change with oil level. Any ideas would be
appreciated.
Paul Yaw
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org