Date: Sat, 30 Jan 1999 21:26:46 -0800
From: Paul <rotaryeng@earthlink.net>
To: z <rotaryeng@earthlink.net>
Subject: Building your own E-shaft ignition trigger.
I made the interrupter ring out of carbon fiber.
It is an ideal material for this application as
it has a high strength to density ratio and
it is very stiff not to mention very light weight.
This saves drilling a bunch of holes in the fly wheel which
might damage it. The holes in the interrupter ring can be
made into slots if you need a stronger pulse at 6000 RPM.
I added another pickup as per Tracy's requirements.
The exact angular orientation remains to be determined
from Tracy's data.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com