Alan Tolle wrote:
I should have noted that there is a little (very little) technique involved
in mixing 2 cycle oil with the gas when refueling the airplane. The fueling
nozzle in inserted about 1 inch into the airplane gas tank. As the fuel is
flowed into the tank the 2 cycle oil is poured onto the end of the fuel
nozzle. The mixing is very vigorous.
The pilot already knows (or should know) about how much gas is going to be
required to fill the tank. Keeping track of the fuel used based on elapsed
time on any flight is a very important pilot task --- one should never,
ever believe a gas gauge. I have seldom missed my fuel required estimate
by more than a gallon.
Anyway, one hour of flight means 10 gallons of gas which needs 10 ounces of
oil.
The oil flow doesn't need to be perfectly proportional to fuel flow. Even
if there were some means of measuring, I don't think you would find any oil
rich or oil lean gas in the tank.
I still say this is a pain in the ass, but it is the simplest, safest, and
cheapest. It has also worked for hundreds of hours. If it had not worked,
we would have known about it a long time ago. I don't think apex seals
would last very long without lubrication.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org