Subject: How not to build a radiator duct.
From: Paul
Date: 3/4/1999, 9:56 PM
To: z

I would have guessed that exit duct configuration III
would have been the way to do it but I would have been
wrong. Exit duct II is better.

Apparently you need a stright section of duct behind the
radiator to keep the velocity through the core high near
the edges. Too much curve too soon slows the air through
the edges of the core.
 
Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

ductflo3.jpg