Alan Tolle wrote:
Response to Ed Anderson
Diana and I have met hundreds of nice people over our twenty years in the
home-building world, and we really wish that we could remember all of them.
The Frederick forums were a lot of fun.
As I said, my comments were not intended to criticize, and I am surely aware
of how the weight can grow --- a little here and a little there. A paint
job can add 25 pounds, or it can add 50 pounds, depending on how it is done.
I was not really concerned about the total weight, just curious. Your
accounting gave me most of the answers.
My real interest in this discussion has been in weight and balance, and in
that department your aircraft sounds fine. (Please refer to my later post
on the weight and balance subject.) I wouldn't worry about putting your
baby on a diet to reduce it's weight. Better to solve the cooling problems
and then fly the hell out of it.
Just a note. On your spark plug problem I would not have flown the airplane
when you fired up and the engine ran rough for five minutes. Your engine
had a problem and it was trying to tell you so. It might have just been a
fuel fouled plug, but you had no way to know that for sure. The first thing
to look at in a rough engine is always the plugs, and they tell a story ---
black says too rich, burned up says too lean. (I ran a lot of 100 LL and
never had a stitch of a problem with lead fouling.) In our aircraft rotary
engine applications where we lean the fuel-air mixture for altitude, spark
plug electrode erosion is going to be the first thing to look for,
particularly as we reach higher power settings. I have eroded a few.
Should have said something earlier.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org