Subject: Vince's dynamic chamber intake manifold.
From: Paul
Date: 3/4/1999, 12:25 AM
To: z

VMAZDA@aol.com wrote:

Hi Paul
You are right. I am using a modified 86 lower half intake manifold. The center
adapter is my modified first adapter. The first set up used was the top half
of a 88 turbo intake. It was to tall for a rv6a so it was back to the drawing
board and I decided to use the top half of a 93 rx7. It sits low enough now so
no problem. The adapter tubes are slanted at the top because the 93 manifold
runners are closer together than the 86. I am also using the 93 throttle body.
I am using as much of the factory parts as possible. This engine will have Air
Flow Performance Injection. I have had them look at my system and was advised
that there should be no problem with using this system. The biggest problem
was making the adapter for the throttle body.
VINCE VMAZDA


Vinces-intake-manifold2.jpg

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

Vinces-intake-manifold2.jpg