VMAZDA@aol.com wrote:
David Carter wanted to know what engine and system I am using?
The engine you see in the picture is a 6 port, all non turbo engines are 6
port 1986 to 1992. An engine without the intake manifold will show you the
ports. 2 ports in the center housing and each end housing will have 2 ports
each- thus 6 ports. Turbo engines come with 4 ports total. The 6 port manifold
has 2 accuators bolted to the side and is fairly short. Turbo intake manifold
is much taller with no accuators.
I cut the accuators off and then welded up the holes. If you are looking for
an engine use only 1986 and up 6 port engines. Turbo engine have low
compression rotors.
By the way the engine you see is just a dummy. It just a bunch of housings
bolted together. It is not advisable to do your engineering on a good or newly
rebuilt engine. If anything gets into the engine and you don't know you could
end up buying some expensive parts. My newly rebuilt engine is safely put
away.
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org