VMAZDA@aol.com wrote:

Hi Tracy
I guess what I want to know is how you set up your ignition system. How you
split the leading and trailing and how you set up your backup system. Can you
isolate the leading from the trailing in the primary system and the back up
system. It is important that you can run on just the leading plugs on the
primary system or the back up system. What do you use to check weather the
leading or the trailing plugs are firing? What failures have you had, if any
with your system? Will your system work with MSD or JACOBS? How many amps does
your system require and at what voltage does your system fail at (hi and low).
Is your system sensitive to heat or cold or other electronic devices? How far
can you run the wiring?
My shop address is Vince and Dicks Service Center
                               2865 Foothill Blvd.
                               La Crescenta, Calif. 91214
If you want to give me a call 818-249-6959 you can usually find me in at lunch
time.
Looking forward to talking to you.
VINCE Hearn

Save yourself some money Vince and using Tracy's ignition system.
You will get free fuel injection :-)

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org