Subject: oil injection/add to gas
From: Paul
Date: 3/4/1999, 8:36 PM
To: z

Marvin Kaye wrote:

Seems to me that mixing the oil with the fuel should be making a solution,
not a suspension... given enough time, even the unagitated oil/fuel mixture
should homogenize due to normal diffusion.  Consider model aircraft fuel,
which might be 18% oil, 5-15% or more nitromethane, the balance alcohol...
leave it sitting around forever and it never seems to settle out because
it's a solution, not a suspension.  Same thing applies here, doesn't it?
If so I would expect that the oil won't settle out at all, rather that if
you allow the solvents to evaporate the solution will simply become oilier
and oilier.

   <Marv>


Which is not a bad thing. IMHO I think you have to have way more
than two ounces per gallon to start to affect the plugs ability
to fire. Anybody had oil fouling problems in their rotary
IN AN AIRPLANE?

PL
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org