Subject: CG in the rotary powered kit plane
From: Paul
Date: 3/5/1999, 9:44 PM
To: z

Finn Lassen wrote:

Allan, since you're familiar with installation in an RV-3, I'd like to hear how
these numbers compare with a "standard" Lycoming RV-3:

Ref: Firewall, prop flange is 35" forward firewall.

Engine mount/plate       16       6"?         96
Engine w/redrive        229      16"        3664
Alternator               9        7"          63
Starter                  9       26"         234
Crankangle sensor        2 ?      6"          12
Oil filter               1        6"           6
Oil cooler               7       15"         105
Oil pan                  6       14"          84
Carbs                    5       15"          45
Intake manifold,etc.     6       15"          90
Exhaust                  6 ?     14" ?        84
Ig Coils                 5        6" ?        30
Radiators                10      25"         250
Coolant                  14      20" ?       280
Oil                      12      16"         192
-------------------------------------------------
Total                   337      15.53"     5235

CG of engine installation 35 - 15.5 = 19.5" aft prop flange,  or 23" forward wing
leading edge.

I had planned not to install the battery until I had the plane at the airport,
fully assembled and weighed, but if you could give an idea of where I should put
it (based on the above numbers), I'd rather do it now. In addition to integral
wing tanks, I have the 25 gal fuselage tank (CG 10" aft firewall).

Finn


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org