Subject: I blew it big time. How not to build a radiator duct.
From: Paul
Date: 3/5/1999, 5:29 PM
To: z

I blew it big time. 
I now see why so many people had problems.

This is the text to use with
the picture. Print the picture and erase the last message
on the subject. I had a and b interchanged in some sentences.

Sorry.

Paul


V. E. Welch wrote:

OK, if this is what the book says NOT to do...................how does it
recommend that it SHOULD be done?  All JPG's are appreciated.

Vince

I uploaded this before but I was not too clear on what this is.

This is the theory of the right way from the same book.
Kuchemann & Weber's book "The Aerodynamics Of Propulsion".

The upper chart shows the duct wall shapes of the upper 
part of two ducts with their coordinates. 
Shape "a" and shape "b". Y sub B is one half the max height
of the radiator. This make the chart non dimensional.
AKA all real dimensions are calculated based on the 
radiator core size.

In order to get complete ducts you 
need to mirror image them about the line of symmetry.
One wall curves upward near the radiator face and that
is the one to use. The other sort of makes a lay down
S shaped wall with a stright shot into the rad core which 
is the wrong one to use.

Wall curve "b" is the shape of the wrong way. 
A duct with this wall shape was labeled the "wrong way"
in the initial message.

"a" is the wall shape of the right way. This is a rather complex
chart so it will take some study.

The numerical coordinates I uploaded some time ago are for shape
"a". If anybody does not have them let me know and I will
upload them again.

Is this now clear? If not let me know.

Paul Lamar               ductflo2.jpg
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org

ductflo2.jpg