Paul Yaw wrote:
I run one ounce to one gallon, but I have never experimented wih any
other mix ratio. More or less may be better, but I do know that this
ratio works fine.
Paul Yaw
80 cc is 2.7 oz per rotor or 5.4 oz. At 150 HP and 75 pounds
of fuel per hour or 12.5 gallons and hour. Therefor one once per gallon
is more than is needed to keep the seal as cool as it gets.
Plenty safe.
This chart is from SAE paper 900036 New Tech Employed for the
Latest 13B-Rotary Engine, Matsuda et al. Mazda
BTW 250 degrees C is 482 degrees F. Those seals run hot!
Paul Lamar sealtemp.jpg
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org