Subject: Two Stroke Oil as general system oil.
From: Paul
Date: 3/5/1999, 12:12 PM
To: z

David Carter wrote:

Hello, Pettit Racing.

I'm gathering info and "best practices" from other race and aviation
uses of Mazda 13B rotary engines.  Current discussion among us fans of
the rotary is "oil injection".  In order to not trash the apex seal with
residue from injecting regular crankcase oil, most (all) aircraft users
currently pre-mix 2 stroke oil with gasoline in the fuel tanks when
refueling.

I would rather use the stock oil injection system - if I can use two
stroke oil in the crankcase for general lubrication and cooling purposes
and thereby also have the benefit of injecting 2 stroke oil out of the
crankcase onto the apex seals.  The oil will be changed every 50 hours
of aviation use.  Will be running the engine at 6000 rpm at cruise power
at about 120 hp (3/4 of 160 hp).  I'll be using a '90-91 non-turbo
engine with fuel injection with mixture control.

Only research we've turned up is that Mazda "as much as admitted in a
paper on one of their European races that you could use 2 stroke oil in
the crankcase as long as it was equivalent to an API? rating of 40 wt
oil."

I've called Mobile Oil and they won't give any info on "wt" rating of
their 2 stroke oil.

Do you folks have info and/or a recommendation and/or experience with
running 2 stroke oil in the crankcase?   Would really appreciate any
helpful info.

David Carter, Nederland, Texas


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org