Subject: Jim Mosur's RV6 rad dimensions.
From: Paul
Date: 3/7/1999, 7:57 PM
To: z

Neil A. Kruiswyk wrote:

Paul,

    The core on my new rad is 17" X 13" x 5.5" thick or 1215.5 cubed.

    You're going to have a really fun time getting rads 22" X 14" stuffed
into a standard RV-6 cowl.

Neil

Wow that is thick! Where did you get it? What does it weigh?
How much will be in the fuselage and how much will extend
down below the current fuselage line?

I'll cut them down.

Just for a data point Neil, what were the dimensions of your old cores?
We will rate these as "reported to cool" or "not reported to cool".
I assume Jim's are cooling now in the winter up there.

BTW despite the crude diffuser the Thunderbird cools about 60 
to 80 engine HP at 100 MPH. Just as a crude data point. 
(Frontal area 24 sq ft. Cd .3)

The Dodge also cools at 100 MPH with somewhat more HP
I would guess 28 square feet at Cd .35. 70 to 90 engine
HP. I have overheated the Dodge  on a hot day at 5000 to
8000 feet while climbing a mountain. 
 
Paul

The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org