Subject: Car rads for potential use in AC.
From: Paul
Date: 3/8/1999, 9:39 PM
To: z

Bruce A. Frank wrote:


Jeff Spitzer wrote:


Did you find any aluminum ones that don't have plastic end tanks?  That too
seems to be all the rage.  Anyone dare run one of these on an airplane?

Jeff Spitzer

Paul Lamar wrote:

The crimped on plastic end tank seems to be standard now-a-days.
I think there may be a possibility of welding on an aluminum
end tank. If not perhaps fabing alloy end tanks and bending up
the tabs and installing the alloy end tanks in place of
the plastic.

Paul Lamar


So far(400+ hrs on several) the Ford Taurus aluminum radiators with plastic
tanks have shown complete durability with no failures. [Ford V6 powered STOL
aircraft].

Aluminum tanks can be welded in place of the plastic ones but it may be
necessary to pour a layer of hightemp epoxy around the tubes where they go
through the end plate( which has become the floor of the new welded tank).
Griffin Radiator will replace plastic tanks with aluminum and then do the
reseal job. Don't know what they want for the job these days.

Bruce A. Frank

Thanks Bruce. Good info.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org