Jeff Spitzer wrote:
Tracy Crook wrote:
Surprisingly according to Kuchemann & Weber's book "The Aerodynamics Of
Propulsion". This is not a real bad way to duct a radiator.
In other words curving the duct does not help much.
It does indeed work as an internal diffuser.
Paul Lamar
Thanks for clarifying this Paul. The high angle at which the radiator is
placed to the inlet does not hurt, contrary to many stories about the
necessity of orienting the radiator fins in-line with the duct. The reason
is that airflow through the radiator is 100% turbulent, and that is a GOOD
thing. A laminar flow radiator (if such a thing were possible) would be
very inefficient.
Tracy Crook
rws@altavista.net
The boundary layer in most radiators *is* laminar. There's no way around
it. The velocities are low and the fins are small. Therefore the reynolds
number is low and laminar flow prevails. That is the reason for the little
cuts, jogs, and waves found in fins of good radiators. They serve to
reinitiate the boundary layer to restore the cooling effectiveness because,
as you correctly pointed out, laminar boundary layers make for poor cooling
if allowed to exist. Another indicator of the truth to this is that the
pressure drop of the air flowing through a radiator is usually a function
of face velocity to the 1.5 power. Purely laminar flow losses would be
linear as a function of velocity and purely turbulent losses would be a
power of 2. The radiator exhibits an averaging type result of laminar and
turbulent losses.
Jeff Spitzer
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org