Jeff Spitzer wrote:
Bruce A. Frank wrote:
So far(400+ hrs on several) the Ford Taurus aluminum radiators with plastic
tanks have shown complete durability with no failures. [Ford V6 powered
STOL aircraft].
Aluminum tanks can be welded in place of the plastic ones but it may be
necessary to pour a layer of hightemp epoxy around the tubes where they go
through the end plate( which has become the floor of the new welded tank).
Griffin Radiator will replace plastic tanks with aluminum and then do the
reseal job. Don't know what they want for the job these days.
Bruce A. Frank
Maybe you should add the Taurus Radiator to your survey, Paul. There
should be a zillion of those things around. Any special year or style to
look for Bruce?
Jeff Spitzer
>From what I have seen so far I am willing to bet the new ones are really
big and thin.
BTW for best heat transfer the tubes should go across the short
dimension
of the core rather than vice versa. Not all rads I see are built that
way.
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org