Bruce A. Frank wrote:
At 10:53 AM 3/9/99 -0800, you wrote:
http://www.griffinrad.com.
Looks like the smallest one they have is for a midjet sprint.
at 16 by 18 one row however thick that is. No idea what
the continuous HP would be. The races are real short too at
only ten laps or so on a 1/4 mile dirt track.
Perhaps these could be used in a back to back arrangement.
Kind of expensive way to do it at 223.50 per rad.
Paul Lamar
Griffin will build custom sized for your horse power needs. The less
expensive solution is the salvage yard. One might ask what size (dimensions
and thickness) they recommend and then visit the salvage yard. The other and
usually most expensive is through the dealer.
We piston engine users have been amazed to find that the radiators used in
the car models(high output versions) from which the engines come have proved
to provide adequate cooling even though the modified engines as installed in
the planes are producing 1.5 to 2 times the horse power of the OEM engines.
Since that has worked we have been able to extrapolate with the OEM
radiator's dimensions to come up with the dimensions needed for a radiator
that is differently shaped than the OEM radiator but still up to the cooling
capacity required.
Bruce A. Frank
Bruce what are the dimensions of the Taurus radiator you mentioned?
Paul Lamar
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org