Subject: Nitrous in rotary engines.
From: Paul
Date: 3/10/1999, 10:25 AM
To: z

David Morris wrote:

G'day from DMRH.

If you have a situation like this with the nitrous causing a lean out.
The extra temps resulting from this would normaly make the seal springs
loose their tension if left for long enough. Typically, the time it
takes would depend on how bad the lean out is.

REgards
               Dave Morris

                                          http://www.3rotor.com/dmrh


Keep dumping a lot of two cycle oil in the gas.
That will cool those seals. Maybe somebody should start
making Inconel apex seal springs.

PL
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org