Jeff Spitzer wrote:
At 11:07 AM 3/10/99 -0800, you wrote:
Archie Frangoudis wrote:
Not a bad idea, Inconel springs.
All we need is an inexpensive source of wire.
I made a simple device that winds springs on a lathe,
which allows me to make most springs which are
not available.
Archie
I think those apex springs are flat stock Archie.
Paul Lamar
Inconel is good for high temp. Elgiloy is better.
Jeff Spitzer
The Aircraft Rotary Engine Newsletter. Powered by Linux.
http://home.earthlink.net/~rotaryeng/ http://www.linux.org