Subject: Rotary engine weight, cooling, HP, etc., etc.
From: Paul
Date: 3/11/1999, 2:38 PM
To: z

Jeff Spitzer wrote:

Tracy Crook wrote:

I can operate at full power continuously  with OATs as high as 85 - 90
degrees.  Above that I have to back off a bit but there are no real
operational problems even in temperatures of  100 - 102.

Is this at full speed or at max R.O.C.?  Are you limited in climb speed or
power by cooling?


Even though the engine is cooling well now, I'm always looking for ways to
improve it (for reduced cooling drag if nothing else) so I wanted to ask
you
about the single "shark gill"  that was on top of the Powersport RV-4
engine
cowl.  Did that work well?   Judging from the blast of hot air that comes
through any small opening in my firewall, there must be considerable
pressure in the engine room behind my radiators.   The top of the cowl is
usually a low pressure area so this might be a quick & easy way to improve
airflow through my radiators.   Due to my aversion to fiberglass I've been
reluctant to try it.


Is this an outlet?  I'm not familiar with the powersport installation.  I'm
sure you are aware of the possibility of bad things (oil, fire) in your
face if you put a cowl outlet in front of the winscreen.

Jeff Spitzer


The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org