Subject: Oil & water temps too cool
From: Paul
Date: 3/12/1999, 10:42 PM
To: z

David Carter wrote:

Tracy,

About the water temp running 155 degrees.  From your engine conversion
manual I believe I remember you expressing a desire to not use a
thermostat, probably to eliminate a failure mode.  For those coming
along behind, I'd like to point out that the Racing Beat catalog tells
how to replace the Mazda "bypass" thermostat with a 30 psi racing
thermostat:  Simply plug the hole in the water pump housing just below
the thermostat - use 1/2" NPT pipe thread tap and install a matching
plug.  Stewart Components sells the racing thermostats for $10 for
either 18 psi or 30 psi. (www.stewartcomponents.com)

I've had thermostat failures in all my 1981 and later cars - mine always
disintegrate internally and failed in the "run too cold" mode, typically
after about 4 or 5 years since new.  I have, however, helped a friend
who overheated downtown one day and parked it until we could replace his
thermostat.

My preference is to use the thermostat and make it a "2 year time change
item", along with ELT battery.  I don't think there is a significant
risk of their disintegrating in 2 years or less.

David Carter

A better way in an airplane is to use a cowl flap. That way you reduce
the cooling drag when you don't need the full cooling capacity.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org