Subject: Taurus radiator dimensions And car rad sizeing/BSFC.
From: Paul
Date: 3/12/1999, 11:18 PM
To: z

Bruce A. Frank wrote:


BCGARDNER@aol.com wrote:

Dear Paul,

I went out to my '90 Taurus wagon and measured the radiator, for the list's
enlightenment. It measured 29 x 16 x 1, including the plastic end caps. The
core area, for purposes of measuring surface area, measures 25 x 16 x 1.

I have the 3.0 liter V-6. I have no idea whether the optional larger 3.8
liter
engine had a different radiator.

I don't know if it's a great radiator but I do know there would be a million
of them in junkyards.

Barry Gardner


The SHO version of the 3.0L and the 3.8L V-6 engines are usually placed with
radiators with a core thickness of 2.25" to 2.5". The radiators are aluminum
with plastic tanks made by Modine. The Ford factory rated the 3.8L in the
Windstar Van at 210 hp and the radiator there is the same as in the Taurus.
Ford introduced an upgrade of the 3.8L to 4.2L in the '97 F-150, factory
rated at a longer stroke 210 HP. I have not had an opportunity to check out
the pickup radiator.

Bruce A. Frank

A little clarification on the HP. Those rads are for car use and they
somewhat
reflect the average HP at typical car speeds rather than the peak HP
mentioned 
by Bruce. They will cool for awhile going up a steep grade but that is
still
only about 100 HP at 75 MPH or so for a heavily loaded van or pickup. 

You can verify this if you have a car
with a trip computer in it that gives you average MPG at an avg MPH.
60 MPH at 20 MPG is 3 gals per hour or 18 to 20 pounds per hour of fuel
used. At a BSFC for most cars of .45 that is only about 45 HP.

HP= pounds of fuel burned per hour / BSFC.

BSFC stands for Brake Specific Fuel Consumption. A more or less
constant for all gasoline piston  engines. Its units are;
pounds of fuel burned per brake HP per hour.


My Dodge van will go up the Grape Vine here is So Cal which is one of 
the longest grades in the country at 65 MPH and get 18 MPG in the
bargain.

The 210 HP figure is almost never achieved in a car. A car may see
max HP for just a few millisecs seconds in a wide open throttle flat 
out acceleration run. 

Now it may work out that those rads will cool at 150 HP at 100 MPH in 
climb in an airplane but that remains to be seen.

There is also the differences in flow through the core due to the lack
of
optimum ducting in a car to be considered.

Paul Lamar
 
The Aircraft Rotary Engine Newsletter.              Powered by Linux.

http://home.earthlink.net/~rotaryeng/            http://www.linux.org